Rockwool 159 (Wired mat)
Product DescriptionRockwool 159 is a lightly bonded heavy stone wool mat
stitched on galvanised wired mesh with galvanised wire.
ApplicationsThe wired mat is especially suitable for industrial installations
such as high-pressure steam pipes, reactors, furnaces, etc.
where high demands are made on the temperature resistance
of the insulation. Advantages• Excellent thermal and acoustic insulation
• Suitable for use over irregular surfaces
• Available in a wide range of thicknesses up to 120 mm
• Suitable for use over stainless steel
|  |
Thermal conductivity
| Performance | Temperature | Value | Unit of measure | Standard | Standard |
|---|
| t°m (°C) | 50 | 0.04 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 100 | 0.046 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 150 | 0.052 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 200 | 0.06 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 250 | 0.069 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 300 | 0.081 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°F) | 100 | 0.273 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 | | t°m (°F) | 200 | 0.301 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 | | t°m (°F) | 300 | 0.349 | λ (BTU.in/ft2.h.°F) | EN 12667 | ASTM C177 | | t°m (°F) | 400 | 0.413 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 | | t°m (°F) | 500 | 0.497 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 | | t°m (°C) | 600 | 0.6 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 |
Technical properties and standards| Property | Performance | Standard |
|---|
| Maximum Service Temperature | 660°C
(1220 F°)
| EN 14706
| |
| 750°C
(1382 F°)
| ASTM C411
| | Reaction to fire | A1 | EN 13501-1
| |
| Surface burning characteristics: Flame spread=passed, Smoke development=passed | ASTM E84 (UL 723)
| | Water leachable chloride content | < 10mg/kg, AS-quality for use over stainless steel | EN 13468
| |
| Conforms to the stainless steel corrosion specifi cation as per ASTM test methods C692 and C871 | ASTM C795
| |
| < 10mg/kg (ph-value neutral to slightly alkaline) | ASTM C871
| | Water absorption | Water absorption
< 1 kg/m²
| EN 1609
| |
| Water vapour absorption (vapor sorption)
± 0.02%vol
| ASTM C1104/C1104M
| | Nominal density | 100 kg/m³
(6.2
lb/ft)
| | | Water vapour resistance factor | μ =
1.0 | EN 12086
| | Compliance | Rockwool (RW) wire mesh blankets for thermal insulation of large diameter pipes, flat walls and equipment | CINI 2.2.02
| |
| Standard specification for mineral fibre blanket insulation, type I and II
(NaN F°)
| ASTM C592-06
|
Dimensions
| Thickness
mm | Length mm | Width mm | M2 pr. 40ft HC | Packaging m2/roll | Packaging |
|---|
| 30 | 8000 | 500 | 2200 | 4 | Shrink wrapped | | 40 | 6000 | 500 | 1650 | 3 | Shrink wrapped | | 50 | 5000 | 500 | 1375 | 2.5 | Shrink wrapped | | 60 | 4000 | 500 | 1100 | 2 | Shrink wrapped | | 75 | 4000 | 500 | 934 | 2 | Shrink wrapped | | 80 | 3000 | 500 | 825 | 1.5 | Shrink wrapped | | 100 | 3000 | 500 | 750 | 1.5 | Shrink wrapped | | 120 | 3000 | 500 | 720 | 1.5 | Shrink wrapped |
The following variants are available on request:
- Rockwool 159 SW: Stainless steel mesh and stitching wire
- Rockwool 159 S: Galvanised steel mesh and stainless steel stitching wire
- Rockwool 159 ALU: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool
- Rockwool 159 SW ALU: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool
|
|
