Rockwool 160 (Wired mat)
Product DescriptionRockwool 160 is a lightly bonded rock wool mat stitched on
galvanised wired mesh with galvanised wire. ApplicationsRockwool 160 wired mat is suitable for thermal and acoustic insulation of industrial pipe work, boiler walls, furnaces and industrial smoke exhaust ducts. Advantages• Excellent thermal and acoustic insulation
• Suitable for use over irregular surfaces
• Available in a wide range of thickness up to 120 mm
• Suitable for use over stainless steel
|  |
Thermal conductivity
| Performance | Temperature | Value | Unit of measure | Standard | Standard |
|---|
| t°m (°C) | 50 | 0.039 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 100 | 0.047 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 150 | 0.055 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 200 | 0.065 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 250 | 0.076 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°C) | 300 | 0.091 | λ (W/mK) | EN 12667 | ASTM C177 | | t°m (°F) | 100 | 0.268 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 | | t°m (°F) | 200 | 0.31 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 | | t°m (°F) | 300 | 0.373 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 | | t°m (°F) | 400 | 0.453 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 | | t°m (°F) | 500 | 0.552 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 | | t°m (°F) | 600 | 0.67 | λ (BTU.in/ft².h.°F) | EN 12667 | ASTM C177 |
Technical properties and standards| Property | Performance | Standard |
|---|
| Maximum Service Temperature | 600°C
(1112 F°)
| EN 14706
| |
| 750°C
(1382 F°)
| ASTM C411
| | Reaction to fire | A1 | EN 13501-1
| |
| Surface burning characteristics: Flame spread=passed, Smoke development=passed | ASTM E84 (UL 723)
| | Water leachable chloride content | < 10mg/kg, AS-quality for use over stainless steel | EN 13468
| |
| Conforms to the stainless steel corrosion specification as per ASTM test methods C692 and C871 | ASTM C795
| |
| < 10mg/kg (ph-value neutral to slightly alkaline) | ASTM C871
| | Water absorption | Water absorption
< 1 kg/m²
| EN 1609
| |
| Water vapour absorption (vapor sorption)
± 0.02%vol
| ASTM C1104/C1104M
| | Nominal density | 70kg/m³
(4.4
lb/ft)
| | | Water vapour resistance factor | μ =
1.0 | EN 12086
| | Compliance | Rockwool (RW) wire mesh blankets for thermal insulation of large diameter pipes, flat walls and equipment | CINI 2.2.02
| |
| Standard specification for mineral fibre blanket insulation, type I and II | ASTM C592-06
|
Dimensions
| Thickness
mm | Length mm | Width mm | M2 pr. 40ft HC | Packaging m2/roll | Packaging |
|---|
| 30 | 8000 | 500 | 2200 | 4 | Shrink wrapped | | 40 | 6000 | 500 | 1650 | 3 | Shrink wrapped | | 50 | 5000 | 500 | 1375 | 2.5 | Shrink wrapped | | 60 | 4000 | 500 | 1100 | 2 | Shrink wrapped | | 75 | 4000 | 500 | 1100 | 2 | Shrink wrapped | | 80 | 3000 | 500 | 825 | 1.5 | Shrink wrapped | | 100 | 3000 | 500 | 750 | 1.5 | Shrink wrapped | | 120 | 3000 | 500 | 720 | 1.5 | Shrink wrapped |
The following variants are available on request:
- Rockwool 160 SW: Stainless steel mesh and stitching wire
- Rockwool 160 S: Galvanised steel mesh and stainless steel stitching wire
- Rockwool 160 ALU: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool
- Rockwool 160 SW ALU: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool
|
|
